Reservoir water level monitoring system
Contact Info
- Optics Valley Core Center,
- 张静
- 18062006340
- 18062006340@163.com
Wuhan Zhongdi Hengda - Water Level Monitoring System
System Introduction
The water level monitoring system is suitable for automated measurement of water levels in reservoirs, dams, and rivers. It has a large-capacity storage function and supports multiple communication interfaces, making it applicable to fields such as national geological disaster monitoring, mine geological disaster monitoring, and water conservancy and hydropower monitoring. The monitoring system adopts an integrated design, integrating the sensors required for water level monitoring, data acquisition, data transmission, solar power supply, pole brackets, etc. into one unit, simplifying field installation operations.
Technical Parameters
Measurement Range | 30m |
Resolution | 1mm |
Accuracy | ±3mm |
Operating Temperature | -30℃~80℃ |
Adaptable Water Level Change Rate | Not less than 100cm/min |
Average * Time | ≥ 30000h |
Blind Zone | 0.5m |
Power Supply Mode | Solar energy, storage battery, mains electricity |
Protection Grade | IP67 |
3. System Configuration
Serial No. | Name | Description |
1 | Radar Level Gauge | Used to measure water level |
2 | Digital Signal Collector | Used for data acquisition and storage |
3 | GPRS Antenna | Used for data transmission |
4 | Solar Panel | 100W (can be adjusted according to actual conditions, or replaced with mains power supply) |
5 | Storage Battery | 65Ah maintenance-free battery (can be adjusted according to actual conditions) |
6 | Charge Controller | Protects the storage battery and prevents overcharging; 12V/24V 20A |
7 | Buried Box | Houses internal equipment and provides protection |
8 | Integrated Installation Bracket | Stainless steel galvanized steel pipe, 2 meters (can be adjusted according to actual conditions) |
9 | Cloud Platform | Data display, export, and early warning |
4. Functional Features
1) Supports sending data in different protocol formats to 3 or more addresses;
2) Auto-recovery after disconnection, automatically resending unsuccessfully sent data once the network is restored;
3) Optional synchronous monitoring of storage battery/solar voltage, charge and discharge information, temperature and humidity, signal strength, location positioning information, etc.;
4) Supports multiple working modes: sleep mode, online mode, early warning mode;
5) Has threshold triggering function, automatically reporting immediately when monitoring data exceeds the threshold;
6) Can store data for more than 2 years, with automatic cyclic coverage of old data;
7) Remote control, online upgrade of hardware programs;
8) Non-contact measurement, convenient installation, and very low maintenance requirements;
9) Installation is less affected by terrain; measurement can be performed as long as the bracket is properly installed;
10) Radar waves have a small beam angle, extremely low transmission power, concentrated energy, and stronger anti-interference ability, greatly improving measurement accuracy and reliability;
| Chemicals/Chemical Machinery/Papermaking Testing Instruments | |
